Operating instructions
Weigh the sample, pivot the radiator above it, the measurement starts automatically and ends when the weight is constant. All of the parameters can be changed in the menu using three buttons. The menu is shown in the LC display.
The radiation temperature can be set. In addition to the moisture and solid material, additional measurement parameters can also optionally be displayed.The moisture content can be deter-mined using a timer or the automatic cut-out. Three criteria are individually set for the automatic cut-out depending on the product properties: query start, weight reduction and query interval. The measurement result remains on the display until the device is next used.
The reusable stainless steel sample dishes mean an ongoing cost saving.
Moisture analyser ULTRA X 3011D
The ULTRA X 3011D can optionally be delivered with or without a built-in printer. The printout of all data is carried out in line with GLP. Intermediate values can be printed out at selectable intervals as needed. All of the data are also output via the serial RS 232 interface and USB. The printer can be switched off.
Technical data
Balance
Weighing range: 210 g
Resolution: 0.001 g
Sample volume: max. 95 cm³
Drying bowl: 110 mm diameter
For moisture measuring
Sample weight: any, recommended minimum 4 g
Power of heater: 250 watts
Automatic: automatic drying until weight constant selectable in 3 different modes: start measuring, measuring in intervals, Weight loss / measured during intervals
Timer: 1-180 minutes
Temperature: selectable from 40 °C up to 180 °C
Measured values: % moisture, % dry mass, % moisture ad actual sample weight, g solids per kg
Measuring accuracy: 0.01%
Device identification: 4-digit ID for identifying the device
Menu lock: lock the menu to prevent accidental changes to drying parameters, cal function is further available
Communication
Data output: interface V24 RS 232
Data signals: all weight and measuring data in GLP-format with start time and variable interval print out selectable date, time, total measuring Time, type of sample
With Software ULTRA X DataChannel to transfer on PC as .xls file for Microsoft Excel, .html file, .xml file and .txt file.
For using
Power supply: 230 V 20% / + 15%
Supply frequency: 48-63 Hz
Power consump.: 275 VA
Dimensions: approx. l 385 x w 275 x h 420 mm over all
Weight: approx. 8.5 kg
Accessories
Stainless-steel drying tray | part no. 1000282
Sample tongs (2 sets supplied with the device)
Tray tongs | part no. 1000230
For lifting the tray (supplied with the device)
Power cable | part no. 1000190
Power supply (supplied with the device)
Calibration weight F1 200 g | part no. 1000403
For calibrating the balance
Aluminium foil 130 mm diameter, 0.01 mm | part no. 1000016
For lining the drying tray
Aluminium foil 130 mm diameter, 0.03 mm | part no. 1000017
For lining the drying tray
Foil press | part no. 1000062
For shaping the aluminium foil
Consumables
Paper for printer 58 mm | part no. 1000234
For integrated printer
Thermal paper
Durable 10 years, according to manufacturer
Infrared heater | part no. 1000130
Spare part
Applications
ULTRA X – instruments you will find in almost all fields!
Raw material exploitation – production – processing – storage – trade – research – recycling – monitoring
ULTRA X 3011D
- Food industry
Coffee, cocoa, tea, tobacco, spices, flour, noodles, bread, bakery products, powder, granules, paste, liquids etc.
- Animal nutrition
Dry food, wet food, snacks etc.
- Chemical industry
Powder, granules, paste, liquids, fertilizer, adhesives, paints, soap, cleaning products etc.
- Pharmaceutical industry
Creams, drops, powder, granules, paste etc.
- Agriculture
Grains, feed, seeds, fruits etc.
- Dairy industry
Cheese, quark, yoghurt, butter, evaporated milk, dry milk, casein etc.
- Meat industry
Meat, sausage products, animal food etc.
- Wood industry
Pallets, glues, paint etc.
- Textile processing
Yarns, fibres, leather etc.
- Composting plants
- Waste industry / recycling
- Treatment plant
Sludge
