Operating instructions
Weigh the sample, pivot the radiator above it and switch it on, the measurement ends when the weight is constant. The parameters are set using three buttons in the menu. In addition to the moisture and solid material, additional measurement parameters can also be displayed.
The radiation temperature can also be set anywhere between up to 200 or rather 360 °C. The moisture content can be determined using a timer or the automatic cut-out. Three criteria are individually set for the automatic cut-out depending on the product properties. The measurement result remains on the display until the device is next used.
This device is specialy suitable for bulky substances or bulky substances resistant to high temperarures suche as brass chipps.
The reusable stainless steel sample dishes, size: 110 x 230 x 18 mm enable a higher weighing volume and mean ongoing cost savings.
ULTRA X 3081D moisture analyser
The ULTRA X 3081 can optionally be delivered with a separate printer. The printout of all data is carried out in line with GLP. Intermediate values can be printed out at selectable intervals as needed. All of the data are also output via the serial RS 232 interface and USB. The printer can be switched off.
Technical data
Balance
Weighing range: 400 g
Resolution: 0.001 g
Sample volume: max. 506 cm³
Drying bowl: 110 x 230 mm
For moisture measuring
Sample weight: any, minimum 1 g, recommended minimum 4 g
Power of heater: 250 watts
Automatic: automatic drying until weight constant selectable in 3 different modes: start measuring, measuring in intervals, weight loss / measured during intervals
Timer: 1 – 180 minutes
Temperature: selectable from 40 °C up to 200 °C
Measured values: % moisture, % dry mass, % moisture ad actual sample weight, g solids per kg
Measuring accuracy: 0.01%
Device identification: 4-digit ID for identifying the device
Menu lock: lock the menu to prevent accidental changes to drying parameters, cal function is further available
Communication
Data output: interface V24 / RS 232
Data signals: all weight and measuring data in GLP-format with start time and variable interval print out selectable date, time, total measuring time, type of sample
With Software ULTRA X DataChannel to transfer on PC as .xls file for Microsoft Excel, .html file, .xml file and .txt file.
For using
Power supply: 230 V 20% / + 15%
Supply frequency: 48-63 Hz
Power consump.: 275 VA
Dimensions: approx. l 385 x w 275 x h 420 mm over all
Weight: approx. 8.5 kg
Accessories
Stainless-steel drying tray | part no. 1000282
Sample tongs (2 sets supplied with the device)
Tray tongs | part no. 1000230
For lifting the tray (supplied with the device)
Power cable | part no. 1000190
Power supply (supplied with the device)
Calibration weight F1 200 g | part no. 1000403
For calibrating the balance
Aluminium foil 130 x 260 x 0.03 mm | part no. 1000013
For lining the drying tray
Foil press | part no. 1000123
For shaping the aluminium foil
Consumables
Paper for printer 58 mm | part no. 1000234
For integrated printer
Thermal paper
Durable 10 years, according to manufacturer
Ceramic heater (250 W) | part no. 1000317
Spare part
Ceramic heater (400 W) | part no. 1000318
Spare part
Applications
ULTRA X – instruments you will find in almost all fields!
Raw material exploitation – production – processing – storage – trade – research – recycling – monitoring
ULTRA X 3081
- All light, voluminous materials
- Wood industry
Chips, wood fibers, pellets etc.
- Agriculture
Grasses, straw, hay, animal feed, silage
Tobacco leaves, tea leaves etc.
- Plastics industry
Granules, powder etc. <= 1% moisture
