Moisture analyser ULTRA X 3011QD

ULTRA X 3011QD

Rugged and accurate sampling for high temperature. Suitable for laboratory and production application. A micro processor controlled weight loss dehydration method of moisture analysis offers a truly accurate and efficient result. This process uses infrared drying and continuous weight loss measurement.

The ULTRA X 3011QD is equipped with a quartz heater to dry out the moisture with a high temperature up to 360 °C. All pre-selectable parameters are indicated on the clear LCD-display.

Beside the moisture 5 further data can be calculated, monitored and displayed. The final value of a measurement can be evaluated in two different ways: either by an automatic and product depending stop drying function „KonstaStop“ or via timer.

Further highlights are:

  • continuous costs savings through reusable stainless steel bowls
  • standard interface V24/RS 232
  • additional special accessories such as integrated or separate printers
  • software „DataBridge“ for Microsoft Excel and many more are available

The main criteria for this development have been the following:

  • easy handling
  • practice-orientated
  • robust execution

 

Download PDF

 


 

Almost 70 years of experience with innovative technology forms the basis for the ULTRA X moisture analyser. Precision weighing technology, simple operation, good functionality and design and a robust structure are combined in a practice-oriented manner.

 


 

How can we help you?

Call us at +49 5232 97780 or send an e-mail to info@apinstruments.de

Category:

Operating instructions

Weigh the sample, pivot the radiator above it, the measurement starts automatically and ends when the weight is constant. All of the parameters can be changed in the menu using three buttons. The menu is shown in the LC display.
The radiation temperature can also be set anywhere between 105°C and 360°C.
The moisture content can be determined using a timer or the automatic cut-out. Three criteria are individually set for the automatic cut-out depending on the product properties: query start, weight reduction and query interval.
The measurement result remains on the display until the device is next used.
Higher temperatures result in shorter measuring times.
The reusable stainless steel sample dishes mean an ongoing cost saving.

Moisture analyser ULTRA X 3011QD
The ULTRA X 3011Q can optionally be delivered with or without a built-in printer. The printout of all data is carried out in line with GLP. Intermediate values can be printed out at selectable intervals as needed. All of the data are also output via the serial RS 232 interface and USB. The printer can be switched off.

Technical data

Balance
Weighing range: 210 g
Resolution: 0.001 g
Sample volume: max. 95 cm³
Drying bowl: 110 mm diameter

For moisture measuring
Sample weight: any, recommended minimum 4 g
Power of heater: 375 watts
Automation: automatic drying until weight constant selectable in 3 different modes: start measuring, measuring in intervals, weight loss / measured during intervals
Timer: 1-180 minutes
Temperature: selectable from 105 °C up to 360 °C
Measured values: % moisture, % dry mass, % moisture ad actual sample weight, g solids per kg
Measuring accuracy: 0.01%
Device identification: 4-digit ID for identifying the device
Menu lock: lock the menu to prevent accidental changes to drying parameters, cal function is further available

Communication
Data output: interface V24 / RS 232
Data signals: all weight and measuring data in GLP-format with start time and variable interval print out selectable date, time, total measuring time, type of sample

With Software ULTRA X DataChannel to transfer on PC as .xls file for Microsoft Excel, .html file, .xml file and .txt file.

For using
Power supply: 230 V 20% / + 15%
Supply frequency: 48-63 Hz
Power consump.: 400 VA
Dimensions: approx. l 385 x w 275 x h 420 mm over all
Weight: approx. 8.5 kg

Accessories

Stainless-steel drying tray | part no. 1000282
Sample tongs (2 sets supplied with the device)

Tray tongs | part no. 1000230
For lifting the tray (supplied with the device)

Power cable | part no. 1000190
Power supply (supplied with the device)

Calibration weight F1 200 g | part no. 1000403
For calibrating the balance

Aluminium foils 130 mm x 0.01 mm | part no. 1000016
For lining the drying tray

Aluminium foils 130 mm x 0.03 mm | part no. 1000017
For lining the drying tray

Foil press | part no. 1000062
For shaping the aluminium foil

Consumables

Paper for printer 58 mm | part no. 1000234
For integrated printer

Thermal paper
Durable 10 years, according to manufacturer

Quartz heater | part no. 1000139
Spare part

Applications

ULTRA X – instruments you will find in almost all fields!
Raw material exploitation – production – processing – storage – trade – research – recycling – monitoring

ULTRA X 3011QD

  • All temperature-insensitive substances
  • Building materials
    Cement, concrete, gravel etc.
  • Chemical industry
    Powder, granules, paste etc.