Operating instructions
Weigh in the sample, swing the radiator over it, drying starts automatically and then starts the ashing process when the weight is constant. The ashing process is also stopped when the weight is constant.
The built-in printer prints out the drying and ashing values with all the set parameters in accordance with GLP. Intermediate values can be printed out at selectable intervals if required. All data is also output via USB and the serial RS 232 interface. The printer can be switched off.
All parameters can be changed in the menu using three buttons. The menu is shown on the LC display. The radiation temperature can also be set from 105 °C to 600 °C.
In addition to moisture and solids, other measurement evaluations can be displayed as desired.
The dry matter and the ash residue can be determined using a timer or the automatic switch-off.
For the automatic switch-off, three criteria can be individually set according to the product properties: start of query, weight loss and query interval.
9 different parameter combinations for different samples can be saved in the program memory.
The final result remains on the display until the next time the device is used.
The reusable stainless steel sample dishes mean ongoing cost savings.
Technical data
Balance
Weighing range: 200 g
Resolution: 0.001 g
Sample volume: max. 95 cm³
Drying bowl: 110 mm diameter
For measuring dry matter and ignition residue
Sample weight: any, recommended minimum 10 g
Power of heater: 375 watts
Automatic: automatic drying until weight constant selectable in 3 different modes, start measuring, measuring in intervals, weight loss/ measured during intervals.
Timer: 1-180 minutes
Temperature: selectable from 105 °C up to 600 °C
Perflash: to shorten the drying time, residual weight and temperature (up to 180 C) adjustable
Measured values drying: % moisture, % dry matter, % moisture ad actual sample weight, g solids per kg, g residual weight
Measured values – ashing: % ash residue, % loss on ignition
The automatic ashing after drying can be switched off
Reading accuracy: 0.01%
Device identification: 4-digit ID for identifying the device
Menu lock: to prevent accidental changes to drying parameters, the menu can be locked with a PIN
Cal function is further available
Communication
Data output: interfaces USB and RS 232
Data signals: all weight and measuring data in GLP-format with start time and variable interval print out, date, time, total measuring time, type of sample
With Software ULTRA X DataBridge to transfer on PC as .xls data to Microsoft Excel, .txt date. .xml XML, .csv CSV, pdf PDF.
For using
Power supply: 230 V
Frequency: 50 Hz
Power consump.: 400 VA
Dimensions: approx. l 385 x w 275 x h 240 mm over all, weight: approx. 9.0 kg
Accessories
Stainless-steel drying tray | part no. 1000282
Sample tongs (2 sets supplied with the device)
Tray tongs | part no. 1000230
For lifting the tray (supplied with the device)
Power cable | part no. 1000190
Power supply (supplied with the device)
Calibration weight F1 200 g | part no. 1000403
For calibrating the balance
Aluminium foils 130 mm x 0.01 mm | part no. 1000016
For lining the drying tray
Aluminium foils 130 mm x 0.03 mm | part no. 1000017
For lining the drying tray
Foil press | part no. 1000062
For shaping the aluminium foil
Consumables
Paper for printer 58 mm | part no. 1000234
For integrated printer
Thermal paper
Durable 10 years, according to manufacturer
Quartz heater | part no. 1000139
Spare part
Applications
ULTRA X – instruments you will find in almost all fields!
Raw material exploitation – production – processing – storage – trade – research – recycling – monitoring
ULTRA X 3011QD
- All temperature-insensitive substances
- Building materials
Cement, concrete, gravel etc.
- Chemical industry
Powder, granules, paste etc.
- Biogas plants